Curing Light
-Uniform beam brings better curing effect:
29 blue and violet LED chips arranged in a mixed and interleaved pattern.
-Uniform beam promotes complete photoinitiator reaction within the resin, enhancing resin curing effectiveness.
-Blue and violet lights blend uniformly, preventing uneven spots and dark areas.
-Exceptionally focused light output:
Light angle of only 10.89 delivers improved penetration.
Perfect for indirect restorations,such as orthodontic brackets and bonding.
-Less heat for gentle care:
New pulsed output mode, less heat, while ensuring the curing depth of ≥ 3mm in just 5 seconds, the temperature is significantly lower compared to the constant output (STD Heat), protect the patient's dental pulp and prevent burns to the oral mucosa or soft tissues
Note: The tests were conducted in a simulated oral environment, with a starting temperature of 25.4°C (temperature of porcine gingiva); Method of irradiation: Temperature probe inserted into the porcine gingival epithelium, LED positioned approximately 2mm from the gingiva, with the temperature probe placed at the center of the light exposure, iradiating the gingival area.
-7 Working modes: Normal, High, Turbo, Ortho, Soft, Pulse, Check
Check mode:
This mode outputs a single purple light.
When special glasses are worn, the caries are obviously orange-red.
Application: Detection of caries, calculus and cracked tooth
Normal mode:
Suitable for most treatment scenarios, such as fillings, restorations, etc.
Time setting: 5 s, 10 s, 15 s, 20s
Constant light intensity: 1000-1200 mW/cm²
High mode:
Suitable for quick curing, ensuring enough curing depth
Time setting: 3 s, 5 s
The light is output in a periodic flashing manner, with a maximum light intensity of 18002000 mW/cm².
Constant light intensity: 1800-2000 mW/cm²
Soft mode & Turbo mode:
Effectively reduce the shrinkage rate of resin
Lower the risk of microleakage
Time setting: 5 s, 10 s, 15 s, 20 s
Light itensity is gradually increased from a weak level to 1200 mW/cm²
Ultra high light intensity enables 1 sec curing of 2mm resin
Time setting: 1 s, 3 s
The light is output in a periodic flashing manner, with a maximum light intensity of 2700 - 3000 mW/cm²
Constant light intensity: 2700-3000 mW/cm²
Pulse mode & Ortho mode:
When working in a cycle of treatment, it can effectively reduce heat generation, efficiently dissipate heat and ensure the comfort of diagnosis and treatment.
Time setting: 5 s, 10 s, 15 s, 20 s
The light is output in a periodic flashing manner, with a maximum light intensity of 1000- 1200 mW/cm²
High light intensity with strong penetrability,especially suitable for orthodontic bracket bonding
Time setting: 3 s*5, 3 s*10
Constant light intensity: 2700 -3000 mW/cm²
-Light intensity up to 3000 mW/cm²:
The high light intensity and less light loss bring you sufficient curing depth, which can reduce the curing time and greatly improve the efficiency of resin curing.
-Wide spectrum curing light can cure all resin materials on the market
with a wavelength range of 385-515nm, O-Star Pro is suitable for effective curing of all resins on the market.
indicates: This photoinitiator can better absorb light at this wavelength range.
Note: The data comes from the official website of Ivoclar Vivadent.
-User-friendly curing light:
Wireless charging base
With built-in light meter
Accurate light intensity is essential for efficient resin curing, bringing you and your patients the best treatment experience.
-Ergonomically designed body:
Full-metal body 108 g main unit
-360° rotatable head: easily reach every angle
-Dual buttons + OLED screen
