Curing Light
-Updated With Wide-spectrum LED:
LED.F Pro emerges at the right moment
Compared with general LED Curing Light,it offers wider wavelength range, better for curing bleaching and transparent resins
-Ideal for curing adhesives used with orthodontic brackets, veneers, and posts
-Comes with a light meter
-OLED screen with clear visibility from all angles
-Constant Light Intensity
-Light Hood: made of selected quality materials, preventing Blue-ray injury
-Optical Fiber: Stable light intensity, narrower angle
-Autoclavable at 134°C and 0.22 MPa to prevent cross-infection
-Power input: AC100 V- 240 V 50 Hz/60 Hz
-Light output: 1000 mW/cm²- 3000 mW/cm²
-Net weight: 210 g
-Dimensions: 40 mm ×150 mm × 195 mm
-STD/less Heat Selection: When set to STD Heat mode, the Pulse mode operates with periodic flashing light,while all other modes emit constant light.
When set to Less Heat mode, all modes except STD and Soft use periodic flashing light.
-Newly Upgraded for Wide Spectrum: The emission wavelength range of Led.C wide spectrum curing light is 380 nm - 515 nm, mainly adding the wave band of 380 nm - 420 nm. The additional band can better curing the resin materials containing new-style photoinitiators suchas TPO.
-6 Modes:
Normal Mode:
Constant light intensity: 1000-1200 mw/cm²
Suitable for most treatment scenarios,such as fllings, restorations, etc.
Time setting: 5 s, 10 s, 15 s, 20 s
High Mode:
Constant light intensity:1800-2000 mw/cm²
Suitable for quick curing,ensuring enough curing depth
Time setting: 3 s, 5 s
Turbo Mode:
Time setting: 1 s, 3 s 2700 - 3000 mw/cm²
Ultra-high light intensity enables
1 sec curing of 2 mm resin.
Ortho Mode:
Time setting: 3 s*5, 3 s*10 2700- 3000 mw/cm²
High light intensity with strong penetrability,especially suitable for orthodontic bracket bonding
Soft Mode:
Gradually increases from low intensity and reaches the maximum light intensity of 1200 mw/cm² at 5 seconds, then maintains a stable output.
Time setting: 5 s, 10 s, 15 s, 20 s
Effectively reduce the shrinkage rate of resin; Lower the risk of microleakage
Pulse Mode:
When working in a cycle of treatment, it can effectively reduce heat generation, efficiently
dissipate heat and ensure the comfort of diagnosis and treatment.Time setting: 5 s, 10 s,15 s, 20 s
The light is output in a periodic flashing manner,with a maximum light intensity of 1000-1200 mw/cm²
