Curing Light
-Customized wide-spectrum LED imported from US
-B-Cure Curing Light emits more uniform light, and the local light intensity will not be too low on the same plane.
-In bracket bonding, the light energy is more uniform and penetrates through the bracket comprehensively, so the bonding is more reliable.
-Size: 262.5mm×45mm×28.5mm
-Net weight: 208g
-Three built-in LEDs in one light, which can achieve an optimal broadband spectrum of 385 to 515 nm, that is similar to the spectrum of halogen lights; therefore, new light is suitable for polymerizing the entire range of photoinitiators and materials currently used in dentistry.
-More human- friendly design: ergonomic design with smooth lines and small size.
-Optimized optical fiber: can be autoclaved under 134°C high temperature and 0.22MPa high pressure, effectively avoiding cross infection.
-Light hood: made of selected quality materials, preventing blue-ray injury.
-Modes:
Ortho mode:
Light intensity automatically adjusts to 2000 mw/cm²
The user can set the single curing time for 3 s or 5s, and the device will automatically conduct 10 circles of curing with interval of 1 s.
One operation can basically finish the cementation of 2 to 3 brackets, which reduces operations and improves efficiency.
10 cycles with an interval of 1s after each cycle; Time setting for each cycle can be 3 s or 5 s
Soft mode & Pulse Mode:
Under Soft mode, the power of LED gradually increases, giving a longer gel period for resin to reduce the edge discomfort caused by stress contraction of resin.
Light intensity increases from 0 mw/cm2 to 1200 mw/cm²
Continuous cycle of 1s, including the working time of 0.8s and an interval of 0.2 s;
Time setting: 5 s, 10 s, 15 s and 20 s.
Turbo Mode:
Constant high intensity of 1800- 2000 mw/cm²
Time setting: 3 s and 5 s
Normal Mode:
Constant intensity of 1000-1200 mw/cm²
Time setting: 5 s, 10 s, 15 s and 20 s
