Gold Heat Treated Rotary Files
-Variable pitch: Increase gradually from tip to handle to prevent suction and locking
-Heat Treated Control Memory Ni-Ti Wire: Enhance flexibility and resistance to cyclic fatigue for safe treatment
-ISO Standard Color: Indicate size of tip
-Safety Non-cutting Tip: Reduce ledge formation and apical extrusion, minimize canal transportation
-Sharp Cutting Flutes: Enhance cutting efficiency
-Precise Length Marking
-Taper Indicator
-Usage Protocol:
#10k, Open File, #10k, E-FLEX Path, 06/15, 04/25, 06/25, 04/35
-Size 17:
Color: Yellow
Taper: 8%
Length: 19 mm
Cross-section: Triangular
Suggested speed/torque: 300 rpm / 3 N·cm
-Size 19:
Color: Yellow
Taper: 2%
Length: 19 mm
Cross-section: Square
Suggested speed/torque: 300 rpm / 3 N·cm
-Size 15:
White
Taper: 4%
Length: 21 / 25 / 31 mm
Cross-section: Square
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 20:
Yellow
Taper: 4%
Length: 21 / 25 / 31 mm
Cross-section: Square
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 25:
Red
Taper: 4%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 30:
Blue
Taper: 4%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 35:
Green
Taper: 4%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 15:
White
Taper: 6%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 20:
Yellow
Taper: 6%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 25:
Red
Taper: 6%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 30:
Blue
Taper: 6%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
-Size 35:
Green
Taper: 6%
Length: 21 / 25 / 31 mm
Cross-section: Triangular
Suggested speed/torque: 350 rpm / 2.5 N·cm
